Skip to content

Loft Conversion Cost Calculator

Choose the type of conversion and enter the floor area you will gain to get a 2026 budget range. The type matters more than the size: a mansard can cost more than twice as much per square metre as a rooflight conversion.

Figures checked November 2026.

m²

Usable floor in the finished loft. 30 m² is a common size for a terraced or semi-detached house.

Estimated build cost

£34,500–£51,000

Cost per m² for this type£1,150–£1,700
Typical 30 m² project (Checkatrade)around £50,000

Rounded to the nearest £100. Check whether each quote includes VAT, the party wall surveyor, building control and a new bathroom; those are where quotes differ most.

How the calculator works

  1. Cost is the new floor area multiplied by a 2026 cost per m² for the type: rooflight (velux) £700–£1,100, rear dormer £1,150–£1,700, hip-to-gable £1,400–£2,000, mansard £1,500–£2,500.
  2. For a sense check, the calculator also shows Checkatrade’s typical figure for a 30 m² conversion of the same type.
  3. Larger lofts usually cost a little less per square metre, because fixed costs such as scaffolding and the staircase are spread further.
  4. Quotes differ most on what they include: VAT, a party wall surveyor, building control fees and a new bathroom.

Read more

FAQs

How much does a loft conversion cost in 2026?

Most cost £27,500–£75,000. A rooflight conversion is cheapest at around £700–£1,100 per m²; a mansard is the most expensive at £1,500–£2,500 per m².

How much is a 30 m² dormer loft conversion?

At £1,150–£1,700 per m², about £34,500–£51,000. Checkatrade puts a typical dormer at around £50,000.

Is a hip-to-gable conversion more expensive than a dormer?

Usually, because the side roof is rebuilt as a gable as well as the dormer at the back. Allow around £1,400–£2,000 per m².

Does a loft conversion need planning permission?

Many rooflight and rear dormer conversions fall under permitted development. Mansards, front-facing changes and homes in conservation areas usually need planning permission.

Sources